{"title":"Tuxedo FP8K-DS-XLT Four-Post Lift Parts","description":"\u003cp\u003eThe Tuxedo FP8K-DS-XLT is a four-post drive-on lift built for professional shops that need reliable service and storage capacity. AEPN carries compatible FP8K-DS-XLT replacement parts - rollers, cables, lock assemblies, and cylinders - to keep your lift operating at its best. Browse the full selection below or contact our parts team if you need help finding a part.\u003c\/p\u003e","products":[{"product_id":"bh-7488-1113","title":"Washer, Power Unit Tuxedo (BH-7488-1113)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMaintain the integrity of your lift's hydraulic power unit with this heavy-duty replacement washer. Designed for Tuxedo FP8K and TPF4 series lifts, this washer provides a secure bearing surface for mounting bolts and hydraulic fittings. The SVI BH-7488-1113 is engineered to distribute clamping loads evenly, preventing the deformation of the power unit reservoir or mounting bracket. Small components like these are vital for preventing leaks caused by loose hardware and maintaining a vibration-free motor mount. Constructed from corrosion-resistant materials, it is built to survive the oil-rich environment of an active automotive shop.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Distribution:\u003c\/strong\u003e Specifically sized to provide a wide footprint, ensuring that mounting pressure is evenly applied to prevent structural cracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Compatibility:\u003c\/strong\u003e Designed to fit the power unit assemblies on popular Tuxedo 8,000-lb 4-post and 2-post lift models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Treated to resist rust and chemical degradation from hydraulic fluids, ensuring it won't seize over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Mounting:\u003c\/strong\u003e Helps maintain the torque of the power unit fasteners, reducing operational noise and preventing hardware from backing out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Washer, Power Unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-092, TPF4-500-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-092, TPF4-500-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1113\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-092, TPF4-500-08 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Ammco, Atlas 4T414, Tuxedo 4T414, Atlas FP14KO-A, Tuxedo FP14KO-A, Atlas FP8K-B, Tuxedo FP8K-B, Atlas FP8K-DS, Tuxedo FP8K-DS, Atlas FP8K-DS-XLT, Tuxedo FP8K-DS-XLT, Atlas FP8K-DX-XLT, Tuxedo FP8K-DX-XLT, Atlas PRO OF14K, Tuxedo PRO OF14K\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855644876965,"sku":"BH-7488-1113","price":43.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_2c6fead3-a39d-481e-9231-02319ec7f661.png?v=1785515154"},{"product_id":"bh-7488-1139","title":"Cable Sheave Tuxedo (BH-7488-1139)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEnsure your Tuxedo lift operates smoothly with this heavy-duty cable sheave replacement from SVI International. This pulley is vital for guiding the lifting cables through the lift structure while minimizing friction and wear. It is precision-manufactured to match the dimensions of the original FP8K-DS, DX, and XLT components. The durable construction helps prevent cable fraying by providing a perfectly contoured track for the wire rope. Upgrading to a new sheave can eliminate annoying squeaks and ensure even lifting across all four posts of your machine.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFriction Reduction:\u003c\/strong\u003e Provides a low-resistance path for lifting cables, improving the efficiency of the power unit's lifting cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Longevity:\u003c\/strong\u003e The smooth, precisely machined groove prevents premature wire rope wear and expensive cable replacements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged Construction:\u003c\/strong\u003e Built from industrial-strength materials to handle the constant tension and weight of 8,000lb lifting systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Compatibility:\u003c\/strong\u003e Directly replaces OEM parts FP8K-DS\/DX\/XLT-021 and TT7B-200-08 for an effortless installation process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Cable Sheave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-021, TT7B-200-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1139\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-021, TT7B-200-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1139\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-021, TT7B-200-08 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855644975269,"sku":"BH-7488-1139","price":87.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/A262b994c9b9f4730a5d1c526251c79045.webp?v=1785706760"},{"product_id":"bh-7488-1140","title":"Sheave Shaft-Gz, Crossbeam Tuxedo (BH-7488-1140)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis greaseable crossbeam sheave shaft is a critical pivot point for the pulleys in your Tuxedo FP8K series automotive lift. SVI International has engineered this shaft with an integrated grease channel, allowing for easy lubrication without full disassembly. Regular greasing through this pin ensures that the sheave rotates freely and reduces heat buildup during heavy lifts. It is constructed from high-tensile steel to resist bending and shearing under the weight of heavy trucks or SUVs. Keeping this pivot point well-maintained is essential for the safety and longevity of your lift's cable system.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Lubrication:\u003c\/strong\u003e Features a grease fitting (Zerk) that allows for direct lubrication of the internal sheave bearings or bushing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Steel:\u003c\/strong\u003e Forged from robust materials to serve as a reliable anchor point for heavy-duty lifting sheaves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Rotation:\u003c\/strong\u003e Minimizes rotational resistance, which helps the lift operate more quietly and with less strain on the hydraulic pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact Crossbeam Fit:\u003c\/strong\u003e Tailored specifically for the crossbeam assemblies of Tuxedo FP8K-DS, DX, and XLT series lifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Sheave Shaft-Gz, Crossbeam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-020, TT7B-200-11NEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1140\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-020, TT7B-200-11NEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-020, TT7B-200-11NEW series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645008037,"sku":"BH-7488-1140","price":43.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_64207440-3c99-49e9-b5b8-815e956b18e3.png?v=1785515154"},{"product_id":"bh-7488-1141","title":"Sheave Shaft-Gz (Short), Runway (Dx) Tuxedo (BH-7488-1141)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe SVI BH-7488-1141 is a specialized greaseable shaft designed for the runway sheave assemblies of Tuxedo DX series four-post lifts. Its \"short\" profile is specifically engineered to fit within the compact clearance of the runway structure. This shaft provides the necessary support for the cable sheaves, ensuring they remain perfectly aligned during every lifting cycle. By utilizing the built-in grease port, technicians can keep the pulley mechanism moving smoothly and prevent the pivot from seizing over time. A properly lubricated shaft significantly reduces the risk of cable damage and ensures a more reliable shop environment.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Design:\u003c\/strong\u003e Optimized length to fit the restricted space requirements of the runway sheave housing in DX models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServiceable Pivot:\u003c\/strong\u003e The greaseable design enables routine maintenance that extends the life of both the shaft and the sheave itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment Security:\u003c\/strong\u003e Keeps the runway pulley in its proper position to prevent cable jumping and irregular lifting speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect DX Support:\u003c\/strong\u003e Replaces Tuxedo OEM numbers FP8K-DS\/DX\/XLT-049 and TT7B-300-01-05B with a precision-match component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Sheave Shaft-Gz (Short), Runway (Dx)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-049, TT7B-300-01-05B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1141\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-049, TT7B-300-01-05B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1141\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-049, TT7B-300-01-05B series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645040805,"sku":"BH-7488-1141","price":43.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_ba45f897-c360-4b63-8bb8-a1a1aa2b2291.png?v=1785515154"},{"product_id":"bh-7488-1144","title":"Locking Collar Tuxedo (BH-7488-1144)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eSecure your lift's internal components with this precision-engineered locking collar from SVI International. This part is essential for maintaining the lateral position of shafts and pulleys within the Tuxedo FP8K lift structure. It features a robust clamping design that stays firmly in place even under the vibrations of a busy shop environment. Manufactured to tight tolerances, it ensures that your sheaves and other rotating parts remain correctly aligned with the cables. Replacing a worn or loose collar is a simple way to prevent mechanical shifting that could lead to more significant equipment failures.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositional Stability:\u003c\/strong\u003e Prevents shafts and sheave pins from migrating out of their intended housing during the lift's operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Resistance:\u003c\/strong\u003e Designed to hold its grip securely, ensuring long-term safety without the need for frequent readjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Slides onto standard Tuxedo shafts with a precision-bored interior for a snug and reliable fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Finish:\u003c\/strong\u003e Coated to resist corrosion from moisture and shop chemicals, maintaining its integrity over years of service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Locking Collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-017, TT7B-200-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1144\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-017, TT7B-200-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1144\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-017, TT7B-200-10 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645073573,"sku":"BH-7488-1144","price":16.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_cb471501-ae5b-42bb-be58-eb738410b4e7.png?v=1785515155"},{"product_id":"bh-7488-1145","title":"Set Screw, X 12\" Tuxedo (BH-7488-1145)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe SVI BH-7488-1145 is a critical M8 set screw used for securing pulleys, collars, and shafts in Tuxedo FP8K lift systems. This metric fastener is designed with a 12mm length to provide deep engagement and a secure hold on internal components. Its high-grade steel construction prevents the head from stripping and ensures that the screw can be tightened to the necessary torque. These screws are essential for preventing the movement of parts that could lead to misalignment or cable failure. Keeping a few of these on hand allows for quick repairs and ensures your lift stays in peak operating condition.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Component Locking:\u003c\/strong\u003e Provides the necessary clamping force to keep sheaves and collars fixed in their correct positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 Metric Sizing:\u003c\/strong\u003e Specifically sized to match the factory threads found in Tuxedo FP8K series lifting equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Tensile Strength:\u003c\/strong\u003e Built from industrial-grade steel to resist shearing and vibration-induced loosening over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Protection:\u003c\/strong\u003e Treated with a durable finish to prevent rust, making future removals or adjustments much easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Set Screw, X 12\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e M8, FP8K-DS\/DX\/XLT-018, GB78\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1145\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e M8, FP8K-DS\/DX\/XLT-018, GB78\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1145\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo M8, FP8K-DS\/DX\/XLT-018, GB78 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645106341,"sku":"BH-7488-1145","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_08b9da82-6d43-4b79-bb7c-91d161d06abf.png?v=1785515155"},{"product_id":"bh-7488-1148","title":"Complex Bushing Tuxedo (BH-7488-1148)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis SVI International complex bushing is designed to handle the high-stress rotation points in your Tuxedo FP8K series automotive lift. It provides a durable, low-friction interface between the sheave and the pivot pin, reducing wear on both components. Engineered to withstand heavy radial loads, this bushing ensures that your lift's pulleys spin smoothly even when under the weight of a full-size vehicle. The precision-machined dimensions guarantee a perfect fit that eliminates play and prevents noisy operation. Regular inspection and replacement of these bushings are key to maintaining a safe and efficient four-post lift.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Mechanical Friction:\u003c\/strong\u003e Facilitates smooth sheave rotation, which minimizes the effort required by the hydraulic system during lifting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad-Bearing Efficiency:\u003c\/strong\u003e Designed to distribute heavy vehicle weights evenly across the pivot point for improved stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear-Resistant Material:\u003c\/strong\u003e Constructed from high-quality alloys that resist deformation and scoring under intense pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Dimensional Match:\u003c\/strong\u003e Provides a seamless replacement for Tuxedo part numbers FP8K-DS\/DX\/XLT-022 and SF2518.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Complex Bushing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-022, SF2518\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1148\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-022, SF2518\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1148\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-022, SF2518 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645171877,"sku":"BH-7488-1148","price":7.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/Abbacd9b40ee844928953d6a5af21e6faw.webp?v=1785706834"},{"product_id":"bh-7488-1158","title":"Runway Spacer Bushing (Tall) Tuxedo (BH-7488-1158)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMaintain the structural precision of your Tuxedo FP8K runways with this tall spacer bushing from SVI International. This component is specifically designed to create the necessary clearance for cables and sheaves within the lift's track. Its \"tall\" profile ensures that internal parts remain correctly distanced from one another, preventing interference during the lifting cycle. Built from heavy-duty steel, this bushing resists crushing and deformation even when subjected to the weight of the heaviest supported vehicles. A properly spaced runway assembly is vital for preventing cable rubbing and ensuring synchronized lift movement.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Gap Control:\u003c\/strong\u003e Ensures consistent spacing within the runway assembly to prevent mechanical interference between moving parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Reinforcement:\u003c\/strong\u003e Acts as a solid support member that maintains the integrity of the runway profile under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Tall Profile:\u003c\/strong\u003e Specifically sized for the internal clearance requirements of Tuxedo FP8K-DS, DX, and XLT models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Manufactured from industrial-grade materials to provide a long service life in a professional garage environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Runway Spacer Bushing (Tall)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-048, TT7B-300-01-04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1158\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-048, TT7B-300-01-04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1158\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-048, TT7B-300-01-04 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645204645,"sku":"BH-7488-1158","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_ba3b515e-71be-4628-8405-401fb2866c36.png?v=1785515155"},{"product_id":"bh-7488-1160","title":"Runway Spacer Bushing (Short) Tuxedo (BH-7488-1160)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe SVI BH-7488-1160 is a short-profile spacer bushing engineered for the runway assemblies of Tuxedo FP8K series lifts. This part is essential for fine-tuning the internal spacing of the lifting mechanism to ensure that cables travel along their intended path. Its compact design allows it to fit into tight sections of the lift where a standard or tall bushing would be impractical. By providing a stable and precisely measured gap, this bushing helps reduce unwanted lateral movement of sheaves. Using high-quality SVI replacement parts ensures that your shop's lifting equipment remains safe and reliable for every vehicle that rolls onto the deck.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Clearance Fit:\u003c\/strong\u003e Designed to provide precise spacing in restricted areas of the four-post lift's runway system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLateral Alignment:\u003c\/strong\u003e Helps keep sheaves and cables centered, reducing the risk of premature wear on the wire rope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Steel:\u003c\/strong\u003e Forged to withstand the constant pressure and vibration associated with commercial vehicle lifting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Replacement Part:\u003c\/strong\u003e Precision-matched to Tuxedo OEM references FP8K-DS\/DX\/XLT-050 and TT7B-300-01-07.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Runway Spacer Bushing (Short)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-050, TT7B-300-01-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1160\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-050, TT7B-300-01-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1160\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-050, TT7B-300-01-07 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645237413,"sku":"BH-7488-1160","price":6.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_f141bee3-9566-4346-b902-6c734f8ec00d.png?v=1785515155"},{"product_id":"bh-7488-1162","title":"Grease Zerk, X 10\" Tuxedo X 10\" (BH-7488-1162)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEnsure your Tuxedo lift's pivot points stay properly lubricated with this high-quality metric grease zerk from SVI International. This M8 x 10mm fitting is a direct replacement for the standard lubrication ports on many Tuxedo four-post lift models. It features a reliable internal check ball that prevents grease from leaking out while keeping dirt and moisture away from sensitive bearings. Regular lubrication through these zerks is the single most important maintenance task for preventing seized shafts and expensive repairs. With a durable, corrosion-resistant finish, these fittings are built to withstand the rigors of a high-volume automotive service center.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetric D8 Threading:\u003c\/strong\u003e Specifically sized to match the original grease ports on Tuxedo FP8K-DS, DX, and XLT series lift components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Check Ball:\u003c\/strong\u003e Features a spring-loaded closure that seals the port against contaminants while maintaining internal lubricant pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreventative Maintenance:\u003c\/strong\u003e Enables quick and easy greasing of sheave shafts and pivot pins to ensure smooth, quiet lift operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-Resistant Coating:\u003c\/strong\u003e Finished with a protective layer to prevent oxidation and ensure the fitting remains functional for years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Grease Zerk, X 10\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e D8, FP8K-DS\/DX\/XLT-049B, GB1155-89, D8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1162\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e D8, FP8K-DS\/DX\/XLT-049B, GB1155-89, D8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1162\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo D8, FP8K-DS\/DX\/XLT-049B, GB1155-89, D8 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645270181,"sku":"BH-7488-1162","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_8a5ec890-2058-41dc-ab2e-570034e11f14.png?v=1785515156"},{"product_id":"bh-7488-1206","title":"Bolt, Crossbeam Tuxedo (BH-7488-1206)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eReplace missing or damaged structural hardware on your Tuxedo lift with this high-tensile crossbeam bolt from SVI International. This fastener is specifically engineered to secure the critical components of the FP8K series crossbeam assembly, which bears the brunt of the vehicle's weight. Its high-grade steel construction is designed to resist stretching and shearing under the intense loads of a fully loaded lift. The bolt features precision-cut threads for a secure fit and is finished to resist the corrosive effects of shop chemicals and salt. Ensuring that your lift's structural bolts are in top condition is a non-negotiable step for shop safety and equipment reliability.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Integrity:\u003c\/strong\u003e Provides the heavy-duty clamping force necessary to keep the lift's crossbeam components safely together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Tensile Strength:\u003c\/strong\u003e Built from premium-grade hardware to meet or exceed original equipment specifications for load-bearing fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Specially coated to prevent rust and degradation, even in harsh or moist garage environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact Fitment:\u003c\/strong\u003e Tailored for a perfect match with Tuxedo OEM parts FP8K-DS\/DX\/XLT-031 and TT7B-200-05.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Bolt, Crossbeam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-031, TT7B-200-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1206\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-031, TT7B-200-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX\/XLT-031, TT7B-200-05 series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645335717,"sku":"BH-7488-1206","price":29.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_f8fe9783-7232-4304-a061-ffac9ecde417.png?v=1785515158"},{"product_id":"bh-7488-1227","title":"Lifting Cable Right Front Rf 29' 3\" Tuxedo (BH-7488-1227)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe SVI BH-7488-1227 is a premium replacement lifting cable designed for the right front position of Tuxedo four-post lifts. Constructed from high-strength galvanized steel wire rope, this cable is built to resist stretching and provide long-lasting performance. It features a 29' 0.5\" length with precision-swaged ends to ensure a perfect fit in your FP8K-DS, DX, or XLT system. Replacing old, frayed, or rusted cables is essential for maintaining a level lift and ensuring the safety of your technicians and the vehicles they service. This USA-certified cable provides the reliability you need to keep your shop running smoothly every day.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Core:\u003c\/strong\u003e Engineered with a protective zinc coating that resists rust and corrosion in demanding automotive shop environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Swaged Ends:\u003c\/strong\u003e Features a 3\/4\"-16 UNF threaded stud on one end and a 3\/4\" button stop on the other for a secure installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e Specifically measured at 29' 0.5\" (348.5\") to match the factory specifications for the right front cable run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Load Capacity:\u003c\/strong\u003e Designed to handle the tension requirements of 8,000lb lifts with a significant safety margin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 348.5\" \/ 29' 0.5\" \/ 8851.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 1:\u003c\/strong\u003e THREADED STUD - 3\/4\"-16 UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 2:\u003c\/strong\u003e BUTTON STOP - 3\/4\" DIA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1227\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX-XLT-094, TT-8138-500-03A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX-XLT-094, TT-8138-500-03A series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645368485,"sku":"BH-7488-1227","price":121.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/A95b740f390204846b38f22f29c21a3c0Z_34bbcde2-7240-4c0a-b4c2-cd9a432d0e52.webp?v=1785646298"},{"product_id":"bh-7488-1228","title":"Lifting Cable Left Front Lf 24\" 1.50\" Tuxedo - FP8K-DS\/DX-XLT-095,, TT-8138-500-03B (BH-7488-1228)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEnsure your lift stays level and safe with this high-quality left front replacement cable from SVI International. This 24' 1.25\" galvanized steel cable is specifically engineered for Tuxedo FP8K series four-post lifts. The durable wire rope construction is pre-stretched during manufacturing to minimize future adjustments and ensure consistent lifting height. It comes equipped with an M20 x 2.5 metric threaded stud and a 1\" diameter button stop for a direct-fit replacement of your original cable. Regular cable inspection and replacement are critical components of any lift safety program to prevent catastrophic failures during vehicle service.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Stretched Wire Rope:\u003c\/strong\u003e Manufactured to reduce initial elongation, ensuring your lift runways stay synchronized from the first use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM Match:\u003c\/strong\u003e Engineered as a perfect replacement for Tuxedo part numbers FP8K-DS\/DX-XLT-095 and TT-8138-500-03B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust End Fittings:\u003c\/strong\u003e Features a heavy-duty M20 threaded stud and a reinforced button stop for secure anchoring in the lift's structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8\" Cable Diameter:\u003c\/strong\u003e Utilizes the standard thickness required for 8,000lb Tuxedo lifts, providing excellent strength and flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 289.25\" \/ 24' 1.25\" \/ 7346.95 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 1:\u003c\/strong\u003e THREADED STUD - M20 x 2.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 2:\u003c\/strong\u003e BUTTON STOP - 1\" DIA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1228\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX-XLT-095, TT-8138-500-03B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1228\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX-XLT-095, TT-8138-500-03B series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645401253,"sku":"BH-7488-1228","price":113.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/A95b740f390204846b38f22f29c21a3c0Z_2fb4c4fe-4e69-4191-b7f8-ef73c50e504c.webp?v=1785646307"},{"product_id":"bh-7488-1229","title":"Lifting Cable Left Rear Lr 9' 7\" Tuxedo (BH-7488-1229)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis SVI International replacement cable is the shortest of the set, specifically designed for the left rear position of Tuxedo four-post lifts. Measuring exactly 9' 7\" (115\"), it connects the runway mechanism to the corner post with precision and strength. The galvanized steel construction provides excellent resistance to the moisture and chemicals commonly found on garage floors. Each cable is manufactured with factory-style swaged ends, including an M20 metric stud, to simplify the installation process and restore your lift to original performance levels. Don't risk safety with worn cables; upgrade to this reliable SVI component for peace of mind in your shop.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized for Left Rear:\u003c\/strong\u003e Sized specifically at 9' 7\" to ensure proper cable tension and synchronization for the shortest cable run in the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetric M20 Stud:\u003c\/strong\u003e Includes the correct M20 x 2.5 threaded end for easy adjustment and a secure connection to the lift's top plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Protection:\u003c\/strong\u003e The zinc-coated wire rope prevents internal rust, which can weaken cables and lead to unexpected breakage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton Stop Termination:\u003c\/strong\u003e Features a 1\" diameter button stop end designed to sit perfectly in the factory cable seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 115\" \/ 9' 7\" \/ 2921 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 1:\u003c\/strong\u003e THREADED STUD - M20 x 2.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 2:\u003c\/strong\u003e BUTTON STOP - 1\" DIA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1229\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX-XLT-096, TT-8138-500-03D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1229\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX-XLT-096, TT-8138-500-03D series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645434021,"sku":"BH-7488-1229","price":68.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/A95b740f390204846b38f22f29c21a3c0Z_9a11d2a9-860b-419c-a17d-04243a577294.webp?v=1785646314"},{"product_id":"bh-7488-1230","title":"Lifting Cable Right Rear Rr 14' 9\" Tuxedo (BH-7488-1230)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eKeep your Tuxedo FP8K series lift functioning at its best with this 14' 9\" right rear lifting cable from SVI International. This mid-length cable is a critical link in the lift's synchronization system, ensuring that both runways rise and fall at the same rate. Made from high-grade galvanized steel, it offers the flexibility needed to travel over sheaves while maintaining the strength to support heavy vehicle loads. The cable features an M20 x 2.5 threaded stud for precise leveling adjustments and a durable button stop end. Replacing this cable as part of your annual maintenance helps prevent uneven lifting and potential structural strain on your lift.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e14' 9\" Precise Length:\u003c\/strong\u003e Specifically engineered for the right rear cable path in Tuxedo FP8K-DS, DX, and XLT four-post lifts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Flexibility:\u003c\/strong\u003e The high-strand count wire rope allows for smooth travel around pulleys with minimal friction or kinking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Grade Hardware:\u003c\/strong\u003e Equipped with a rugged M20 metric stud and 1\" button stop for a secure and easy-to-install connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust and Corrosion Resistance:\u003c\/strong\u003e Galvanized finish protects the cable from the corrosive effects of oil, grease, and moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 177\" \/ 14' 9\" \/ 4495.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 1:\u003c\/strong\u003e THREADED STUD - M20 x 2.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 2:\u003c\/strong\u003e BUTTON STOP - 1\" DIA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7488-1230\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX-XLT-097, TT-8138-500-04C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7488-1230\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is compatible with Tuxedo FP8K-DS\/DX-XLT-097, TT-8138-500-04C series lifts and equivalent automotive hoist systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855645466789,"sku":"BH-7488-1230","price":98.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/A95b740f390204846b38f22f29c21a3c0Z_8bcbeb68-e3d4-43c0-b63a-cfd188361259.webp?v=1785646322"},{"product_id":"bh-7489-1025","title":"Slack Cable Pulley Tuxedo (BH-7489-1025)","description":"\u003ch3\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eThis high-quality Slack Cable Pulley Tuxedo is specifically designed for Tuxedo automotive lift systems, ensuring a precise fit and reliable operation. Engineered by SVI International, this part serves as a direct replacement for OEM reference FP8K-DS\/DX\/XLT-041, meeting or exceeding original equipment specifications. The heavy-duty construction provides the strength and durability required for professional shop environments and demanding lifting applications. As an essential component of your lift's performance, it maintains structural integrity and supports safe vehicle elevation. Manufactured with rigorous quality control standards, this part offers a cost-effective solution without compromising on safety or longevity. Trust SVI International for all your Tuxedo lift repair needs, where USA-certified quality meets industrial-grade engineering.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fit Engineering:\u003c\/strong\u003e Precision-engineered to match the exact dimensions and mounting requirements of Tuxedo lift systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Build Quality:\u003c\/strong\u003e Constructed from high-grade materials to withstand the rigors of heavy-duty automotive lifting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Durability:\u003c\/strong\u003e Designed for a long service life, reducing downtime and maintenance costs for your shop equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned in the USA:\u003c\/strong\u003e Each part is manufactured following strict industry standards and is certified for quality in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Slack Cable Pulley Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Tuxedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Reference:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-041\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI Part Number:\u003c\/strong\u003e BH-7489-1025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eDirect replacement models\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuxedo:\u003c\/strong\u003e FP8K-DS\/DX\/XLT-041\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVI International:\u003c\/strong\u003e BH-7489-1025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Models:\u003c\/strong\u003e This part is designed to fit a wide range of Tuxedo lift models and configurations that utilize the FP8K-DS\/DX\/XLT-041 reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis item can be found in:\u003c\/strong\u003e Tuxedo FP8K-B, Tuxedo FP8K-DS, Tuxedo FP8K-DS-XLT, Tuxedo FP8K-DX-XLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eYou will receive the same product or an OEM-Equivalent that meets the highest standard of the OEM with warranty that will be a direct-fit. Designed in the USA with superior quality to the OEM.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tuxedo","offers":[{"title":"Default Title","offer_id":45855652741285,"sku":"BH-7489-1025","price":23.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/4743\/4661\/files\/tuxedo_62fc7f31-dd05-4db1-af7c-237ee87110b6.png?v=1785515192"}],"url":"https:\/\/aepn.co\/collections\/tuxedo-fp8k-ds-xlt-parts.oembed","provider":"AEPN - All Equipment Parts Network","version":"1.0","type":"link"}